Did you know that PPG (paint) commissioned ASC to modify a Buick GNX for track use?
This info popped up on Facebook, and we’re sharing here what we read there (for those of you not on Facebook).
(some content edited for clarity)
The Buick GNX Pace Car!
Yep, you read that right, but it did not pace the Indy 500.
As confirmed by more than one ASC/Mclaren employee, PPG paint did contract to have ASC build a GNX with Pace Car modifications, for the PPG Indy Car series events and later shown at IMSA sanctioned events.
Special notice to extra modifications done on the car, like the quick pit stop side gas filler on the drivers side rear. (see the first photo)
The PPG built GNX pace car was not one of the numbered 547 and it’s not 1 of the 5 test pilot cars and it is not the infamous GNX #548.
Many wonder what happened to the GNX Pace car.
ASC/Mclaren had the contract to build a few of the PPG pace cars and trucks as can be seen at the PPG pace car web page.
[ the PPG site says: Supposedly it was turned into an IMSA car after its career as a pace car was done. A member of TurboBuick.com purchased the sign, along with some other GNX parts from a buyer in Michigan, and found “PPG GNX” hand written on some parts (ecm chip), leading him to believe he purchased parts from the original BUICK GNX PPG Pace Car. I was told by a former PPG employee that this car had no VIN and was auctioned off once PPG was done using it in the Pace Car fleet. ]
[ Note for Buick auto fans, on the PPG site (which is not actually affiliated with PPG), you can see other Buick pace cars, etc.: 1982 Buick Skyhawk Turbo, 1984 Buick LeSabre, 1985 Buick Wildcat Concept, 1988 Buick Reatta, 1993 Buick Grand Sport Convertible. view at: ppgpacecars.com ]
After the extensive safety and light modifications, most of these Pace Cars were not intended for street use.
Some didn’t have VIN plates, and some that did, had branded titles.
Although the actual fate of the GNX Pace car is undocumented at this time, it has been verified that the some of the GNX parts were indeed stripped from the car and shipped from Michigan to a buyer who was building a GNX clone.
Some of the items that were shipped was the official PPG sign that was displayed with the car at events, fender flares and vents, as well as the chip that was marked PPG GNX which would have had the top speed street limiter removed.
[ the sign said the car was for the PPG Indy Car Series, and this Buick Regal GNX was developed by PPG Industries in cooperation with the Buick Division of General Motors Corporation. It had some specs that were done to the car included. ]
One reader said:
It had a modified oiling system and brakes.
Maybe a cage, though not sure of that or other modifications.
Saw it at PPG Indycar events.
.
[ Photo credit: Roger Beasley for below pic ]
.
.
[ Photo credit: from the PPG site ]
.
.
[ Photo credit: from the PPG site, photos from Pascal Michels ]
.
.
.
.






















