banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header

Chime Module (Buzzer Alarm)

This category on the website [ Solenoids Modules and Wiring ] we are giving you all of the information related to the individual parts in the Buick Turbo Regal, along with the associated wiring, connector plugs, etc.

.

VEHICLE APPLICATION:

Buick Regal, T-Type, Turbo T, Limited, Grand National, GNX

MODULE NAME:

Chime Module (Chime Alarm)

PURPOSE OF MODULE:

warning alarm for: lights on, seatbelt, doors

TURNS ON-OFF / FUNCTIONS / USED WHEN:

different rates of chime are heard for the different alarms.
when lights are left on when leaving the vehicle.
when driver seatbelt not buckled up.
when doors are opened with keys in ignition.

LOCATION IN VEHICLE:

behind dash, between steering wheel and radio

86-87: inside the convenience center, along with: Chime module, CC module, VSS buffer, flasher relay, horn relay.

ORIGINAL GM PART NUMBER:

25524794

MODULE BASE COLOR:

black (oem)

CONNECTOR PLUG COLOR (MODULE SIDE):

black

WIRES ATTACHED (MODULE SIDE):

n/a

CONNECTOR PLUG COLOR (HARNESS SIDE):

black

NUMBER OF WIRES ATTACHED (HARNESS SIDE):

7

COLOR & PURPOSE OF (HARNESS SIDE) WIRES:

orange wire “7” (power input), goes to (junction) to cig/clk fuse
(junction connects to other things)

gray “8” (lights on input), goes to (junction) to brown-white wire to Twilight Sentinel amplifier “G”
(otherwise w/o T/S, gray goes to inst lps fuse)

pink-black “1” (power input), goes to stblt acc fuse
(connects with defogger control [rear window defogger switch] “D”)

light green “6” (key in ign input), goes to ignition key warning switch

black “3” (ground) goes to (junction) to ground
(connects with fasten belts indicator [on dash])
(connects with other things)

yellow-black “2” (fasten belts output), goes to fasten belts indicator (on dash) “5”.

black-white “4” (fasten belts input), goes to (junction) to seatbelt switch “B”

.

OTHER NOTES:

some people have put an upgraded brown color unit in from a later model Buick (different chime / buzzer sounds)

.

PHOTOS OF MODULE AND CONNECTED WIRES:
.

.

Here’s a list of all of the Solenoids Modules and Servos Valves in the Buick Regal:
(click the links to go to the one you need info about)

* Canister Purge Solenoid (Fuel Vapor Canister Purge)
* Chime Module (Chime Alarm)
* Cruise Control Module
* Cruise Control Servo
* EGR Valve
* ESC Module
* Exhaust Gas Recirculation Vacuum Regulator Valve Solenoid (EGR EVRV)
* Heater Flow Water Control Valve
* HVAC Control Vacuum Valve (mode control valve)
* Idle Air Control Valve (IAC)
* PCV Valve (Positive Crankcase Ventilation)
* Proportioning Valve (Prop Valve)
* Starter Solenoid
* Theft Deterrent Controller Module (anti-theft system)
* Torque Converter Clutch Solenoid (TCC)
* Trunk Release Solenoid
* Vacuum Check Valves
* Wastegate Control Solenoid

.

Related posts


Hey, Turbo Buick Fan!

Was this post beneficial?
More Cool Info is Added Daily!
DON'T Miss Out!
Sign up to our FREE subscription service
and receive an email whenever we post new articles.

Just enter your email address below and click the Subscribe button.
(NO spam sent - only new post alerts)

Join 1,027 other subscribers