banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header

Fuel Injectors

This category on the website [ Other Electrical Motors & Parts and Wiring ] we are giving you all of the information related to these assorted components in the Buick Turbo Regal, along with the associated wiring, connector plugs, etc.

.

VEHICLE APPLICATION:

Buick Regal, T-Type, Turbo T, Limited, Grand National, GNX

ELECTRICAL MOTOR / PART NAME:

Fuel Injectors

PURPOSE OF ELECTRICAL MOTOR / PART:

sprays fuel into the intake manifold

TURNS ON-OFF / FUNCTIONS / USED WHEN:

in constant use while the engine is running

LOCATION IN VEHICLE:

engine compartment, top side of motor, left and right sides, between fuel rail and intake manifold

ORIGINAL GM PART NUMBER:

25519365

.

.

ELECTRICAL MOTOR / PART – BASE COLOR:

metal, black
(top/bottom tips may be a different color)

CONNECTOR PLUG COLOR (ELECTRICAL MOTOR / PART SIDE):

black (usually)

WIRES ATTACHED (ELECTRICAL MOTOR / PART SIDE):

n/a

CONNECTOR PLUG COLOR (HARNESS SIDE):

black

NUMBER OF WIRES ATTACHED (HARNESS SIDE):

2 wires on each fuel injector plug
(12 total wires)

COLOR & PURPOSE OF (HARNESS SIDE) WIRES:

[POWER SUPPLY FOR ALL INJECTORS:]

brown “B”, goes to (connector plug with the other injectors) to (junction) to pink-black wire to FP/INJ fuse.

.

[INJECTOR CONTROLS, EACH INJECTOR HAS A SEPARATE CONTROL WIRE]

INJECTOR 1:
black “A”, goes to (junction) to light blue wire to ECM “D14”

INJECTOR 2:
black-light green “A”, goes to (junction) to purple wire to ECM “C15”

INJECTOR 3:
black-pink “A”, goes to (junction) to brown wire to ECM “D15”

INJECTOR 4:
black-red “A”, goes to (junction) to light green wire to ECM “D16”

INJECTOR 5:
black-white “A”, goes to (junction) to tan wire to ECM “B12”

INJECTOR 6:
black-yellow “A”, goes to (junction) to gray wire to ECM “C12”

.

PHOTOS OF ELECTRICAL MOTOR / PART AND CONNECTED WIRES:
.

84-85 ecm fuel pump oil pr

.

OTHER NOTES:

The stock injectors are 28 lb/hr, and are “high impedance.”
(this rating is good for Turbo Buicks up to 300 horsepower)

[aftermarket versions are available in high or low impedance versions]

This is usually one of the first things upgraded on most vehicles.
42’s use to be the go to versions, but 60 pound injectors are now a good all around upgrade (assuming you didn’t go to crazy on your engine build).
YOU MUST HAVE YOUR AFTERMARKET ECM CHIP REBURNED FOR AN INJECTOR UPGRADE!

[SEE fuel injector wiring harness upgrade]

[SEE fuel injector hot wire kit]

.

Here’s a list of all of the Misc. Electrical Motors & Parts in the Buick Regal:
(click the links to go to the one you need info about)

* Air Conditioner Compressor & Clutch (A/C Compressor)
* Cigarette Lighter
* Fuel Gauge Sending Unit (Fuel Gage Sender)
* Fuel Injectors
* Fuel Pump
* Horn
* HVAC Blower Motor
* HVAC Fan Blower Resistor
* Power Antenna
* Power Door Lock Actuator (Motor)
* Power Window Motor
* Radiator Coolant Fan
* Radio (Stereo)
* Seat Belt Door Jamb Tensioner Release
* Speakers (4 & 6 Systems, Concert Sound)
* Sunroof Motor (Moonroof, Astroroof)
* Wiper Washer Motor

.

Related posts


Hey, Turbo Buick Fan!

Was this post beneficial?
More Cool Info is Added Daily!
DON'T Miss Out!
Sign up to our FREE subscription service
and receive an email whenever we post new articles.

Just enter your email address below and click the Subscribe button.
(NO spam sent - only new post alerts)

Join 1,013 other subscribers