banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header

OEM Fuel Rail Extension 2 Outlet Tee Adapter For Gauges Etc

This nifty Tee Adapter screws onto the end of the stock 1984-1987 Buick Regal fuel rail, and gives you a new handy spot to attach an add-on under-the-hood fuel gauge, a transducer, or pressure sensor, etc., and has a new screw-in schrader valve (which replaces the original factory version).
You can also completely remove the schrader valve and have 2 new connection spots (that’s what we did).

Installation is simple.
Remove the stock schrader valve from the fuel rail, screw this new TEE fitting on, and you’re good to go to connect your needed accessories.
(we used teflon tape between the stock fuel rail and the new TEE to insure no gas leaks. same goes for the mounted up accessories)

It comes with a cap for one outlet of the tee, if your Gbody Regal requires it.
(the cap goes on the side with the schrader valve to keep it free from debris, or accidentally triggering the valve open).
The cap fits both outlet ends on the tee, and the schrader valve can be inserted into either outlet as well.

.

.

These tee adapters are brand new parts and made out of brass.
The outlets accept -4 AN fittings, and are ready to ship out to you if your Buick Turbo Regal needs one!

(this item probably fits other Gbodies and other vehicles as well IF the fuel rails are the same one as the Buick Regals have. You should verify this however to make sure!)

Below are photos of the fuel rail tee adapter, as well as some pics (further down) with it installed on our Buick Grand National.

(we have a fuel gauge on one end, and a AN braided line on the other which connects to a fuel transducer, for which the transducer sends info to the powerlogger)

.

.

Take note that most aftermarket fuel gauges utilize a 1/8″ NPT fitting (threads).
This TEE adapter has -4 AN threads.
So MAKE SURE you get the adapter piece to convert the gauge to the tee!
(this is the red colored tube you see in our installed pics below)
Most vendors that sell fuel gauges have this adapter (it may or may not be included with the new gauge), so ask for it when you order your fuel gauge!
[this additional adapter is NOT included with the TEE]

.

Do you need a fuel rail TEE for your Turbo Regal?
These are IN STOCK & READY TO SHIP TO YOU!
Just $30 shipped First Class Mail to your door!
(shipped in USA ONLY)

Request the “Fuel Rail TEE” here:
SEND US AN EMAIL
with your paypal address listed in the notes and we will send you an invoice for one! (or however many you need)

(we also accept postal money orders, mention that & we’ll tell you where to send it)

.

.

this is the side that attaches to the stock fuel rail
get a cool new FREE decal included with this item! Because everybody loves free stickers!

.

Want a fuel rail TEE for your Turbo Regal?
IN STOCK & READY TO SHIP TO YOU!
Just $30 shipped First Class Mail to your door!
(shipped in USA ONLY)

Request the “Fuel Rail TEE” here:
SEND US AN EMAIL
with your paypal address listed in the notes and we will send you an invoice for one! (or however many you need)

(we also accept postal money orders, mention that & we’ll tell you where to send it)

*** IF THE ABOVE LINKS ARE STILL VISIBLE – THEN WE HAVE THESE IN STOCK READY TO SHIP OUT! ***

.

Related posts


Hey, Turbo Buick Fan!

Was this post beneficial?
More Cool Info is Added Daily!
DON'T Miss Out!
Sign up to our FREE subscription service
and receive an email whenever we post new articles.

Just enter your email address below and click the Subscribe button.
(NO spam sent - only new post alerts)

Join 1,013 other subscribers