This category on the website [ ECM Wiring Harness Ignition Related ] we are giving you all of the information related to the individual parts in the Buick Turbo Regal, along with the associated wiring, connector plugs, etc.
.
VEHICLE APPLICATION:
Buick Regal, T-Type, Turbo T, Limited, Grand National, GNX
PART NAME:
Fusible Links
PURPOSE OF PART:
protection of assorted circuits
TURNS ON-OFF / FUNCTIONS / USED WHEN:
all of the fusible links are constant hot
LOCATION IN VEHICLE:
near or attached to the starter
(see below for specifics)
ORIGINAL GM PART NUMBER:
–
PART BASE COLOR:
red wire with black fusible link
CONNECTOR PLUG COLOR (ECM WIRING HARNESS IGNITION SIDE):
ring terminal
WIRES ATTACHED (ECM WIRING HARNESS IGNITION SIDE):
1 wire for each fusible link
CONNECTOR PLUG COLOR (HARNESS SIDE):
–
NUMBER OF WIRES ATTACHED (HARNESS SIDE):
4
COLOR & PURPOSE OF (HARNESS SIDE) WIRES:
fusible link “A” goes to (junction) to:
Blower relay, horn relay,
(junction connects with in line fuses)
(junction connects with other things)
located on the engine harness, near the starter solenoid
fusible link “B” goes to (junction) to:
headlight switch “C” (circuit breaker), cig/clk fuse
located on the engine harness, near the starter solenoid
fusible link “E” goes to (junction) to coolant fan
(junction connects with low speed coolant fan relay “1”)
(junction connects with coolant fan delay relay “C”)
located RH (passenger) side of engine, near the starter solenoid
fusible link “J” goes to (junction) to:
red wire side, to battery (positive)
orange wire side, to ECM (memory)
[the battery connection spot has other connections to other things]
located RH (passenger) side front of engine compartment behind battery
.
PHOTOS OF PART AND CONNECTED WIRES:
.
.
OTHER NOTES:
–
.
Here’s a list of all of the ECM Wiring Harness Starting Charging Ignition Wiring & Connectors in the Buick Regal:
(click the links to go to the one you need info about)
* ALDL
* Alternator
* Battery Cables (Positive & Negative)
* Bulkhead Connections & Distribution Blocks
* Coil Pack
* ECM Memory Power Wire
* ECM
* Fuel Pump Test Tap
* Fuse Box
* Fusible Links
* Harness Routing
* Ignition Module (IM)
* Inline Fuses
* Main Grounds (Grounding Points)
* SES Light
* Starter
* Tach Tap Harness
* Volts Light
* Wiring Harness (Main Harnesses in car)
.
