This category on the website [ ECM Wiring Harness Related ] we are giving you all of the information related to the individual parts in the Buick Turbo Regal, along with the associated wiring, connector plugs, etc.
.
VEHICLE APPLICATION:
Buick Regal, T-Type, Turbo T, Limited, Grand National, GNX
PART NAME:
Harness Routing
PURPOSE OF PART:
this is the routing of the wiring harnesses throughout the Buick Regal
TURNS ON-OFF / FUNCTIONS / USED WHEN:
in constant use while the ignition key is on
LOCATION IN VEHICLE:
several, see photos
ORIGINAL GM PART NUMBER:
–
PART BASE COLOR:
black tape or loom surrounds the wires
CONNECTOR PLUG COLOR (ECM WIRING HARNESS IGNITION SIDE):
black
WIRES ATTACHED (ECM WIRING HARNESS IGNITION SIDE):
–
CONNECTOR PLUG COLOR (HARNESS SIDE):
black
NUMBER OF WIRES ATTACHED (HARNESS SIDE):
–
COLOR & PURPOSE OF (HARNESS SIDE) WIRES:
–
.
OTHER NOTES:
There’s 9 different sets of wiring harnesses in the Gbody Regal.
[SEE wiring harness]
Note that on the diagram, the “cross body harness” is behind the dash, and is actually just integrated into the main harnesses that run to the left and right sides of the car.
(instead of it being a separte section as shown in the diagram)
.
PHOTOS OF PART AND CONNECTED WIRES:
.
.
Here’s a list of all of the ECM Wiring Harness Starting Charging Ignition Wiring & Connectors in the Buick Regal:
(click the links to go to the one you need info about)
* ALDL
* Alternator
* Battery Cables (Positive & Negative)
* Bulkhead Connections & Distribution Blocks
* Coil Pack
* ECM Memory Power Wire
* ECM
* Fuel Pump Test Tap
* Fuse Box
* Fusible Links
* Harness Routing
* Ignition Module (IM)
* Inline Fuses
* Main Grounds (Grounding Points)
* SES Light
* Starter
* Tach Tap Harness
* Volts Light
* Wiring Harness (Main Harnesses in car)
.
