This category on the website [ ECM Wiring Harness Related ] we are giving you all of the information related to the individual parts in the Buick Turbo Regal, along with the associated wiring, connector plugs, etc.
.
VEHICLE APPLICATION:
Buick Regal, T-Type, Turbo T, Limited, Grand National, GNX
PART NAME:
ALDL (Assembly Line Diagnostic Link) Connector
PURPOSE OF PART:
diagnostic analysis connector for various components / systems in the vehicle
TURNS ON-OFF / FUNCTIONS / USED WHEN:
in constant use when the key is turned forward/backward (in any position)
LOCATION IN VEHICLE:
interior, under the dash, drivers side, near the front of the console, left side below radio
ORIGINAL GM PART NUMBER:
?
PART BASE COLOR:
black
CONNECTOR PLUG COLOR (PART SIDE):
black
WIRES ATTACHED (PART SIDE):
6
CONNECTOR PLUG COLOR (HARNESS SIDE):
n/a
NUMBER OF WIRES ATTACHED (HARNESS SIDE):
n/a
COLOR & PURPOSE OF (HARNESS SIDE) WIRES:
black (“A”), goes to (junction) to ground
white-black (“B”), goes to ECM (“A9” 5v, diagnostic test)
brown-white (“D”), goes to SES (dash) light
orange (“E”), goes to ECM (“A8”, serial data)
tan-black (“F”) goes to (junction) (which connects to TCC solenoid [“D”] and ECM [“A7” TCC control] )
gray (“H”) goes to (junction) (which connects to ECM [“A4” exhaust gas recirculation {EGR} control] )
(junction connects with EVRV)
.
OTHER NOTES:
–
.
PHOTOS OF PART AND CONNECTED WIRES:
.
.
Here’s a list of all of the ECM Wiring Harness Starting Charging Ignition Wiring & Connectors in the Buick Regal:
(click the links to go to the one you need info about)
* ALDL
* Alternator
* Battery Cables (Positive & Negative)
* Bulkhead Connections & Distribution Blocks
* Coil Pack
* ECM Memory Power Wire
* ECM
* Fuel Pump Test Tap
* Fuse Box
* Fusible Links
* Harness Routing
* Ignition Module (IM)
* Inline Fuses
* Main Grounds (Grounding Points)
* SES Light
* Starter
* Tach Tap Harness
* Volts Light
* Wiring Harness (Main Harnesses in car)
.
