banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header

Changing Front Corner Side Marker Light Bulbs

The front corner side marker lights serve a dual purpose.
When the regular lights are on, they serve as a running (park) light.
When the turn switch (or emergency / hazard lights) is activated, they serve as a blinker (flashing / blinking turn signal).

The stock OEM light is a white bulb behind a (white in the front, amber in the back) lens.

They are wired in such a way that the (circuit) current alternates between the 2 wires.
It is powered/grounded thru the bumper lights (it doesn’t have an actual separate ground thru THIS light).
This means that when the running lights are on, THIS light stays constantly lit.
When the turn signal is activated, the (power) current switches (from brown wire to black wire), and THIS light starts blinking.

.

SPECS:

OEM BULB NUMBER: 194

SOCKET COLOR: off-white

NUMBER OF WIRES ATTACHED: 2

WIRE COLOR & PURPOSE:

LH (driver side) side marker light:
CONNECTOR 1: brown to junction (connects to both bumper lights, park side of outer)
CONNECTOR 2: black to junction (connects to turn signal switch, LH (driver side) (bumper, outer) (turn side of) light)

RH (passenger side) side marker light:
CONNECTOR 1: brown to junction (connects to both bumper lights, park side of outer)
CONNECTOR 2: black to junction (connects to turn signal switch, RH (passenger side) (bumper, outer) (turn side of) light)

.

.

HOW TO CHANGE BULB:

,

Remove the 4 T15 screws that secure the headlight bezel.
Twist out the socket. Pull out the bulb.

To reassemble, reverse the order.

.

BEFORE WORK STARTS:

.

.

REMOVING HEADLIGHT BEZEL:

.

.

REMOVING LIGHT:

.

OEM light bulb ON

.

This is part of an ongoing series about the details & specifics on Changing Light Bulbs in your Buick Turbo Regal:

1) Overview
2) Head Lights
3) Bumper Lights (running lights, turn signals)
4) Front Corner Side Marker Lights (THIS page)
5) Front Lower Cornering Lamps (Limited models)
6) Under Hood Light
7) Brake & Turn Tail Lights
8) Backup Lights (reverse light)
9) Rear Running Tail Lights (center & side corner marker lights)
10) License Plate Light
11) Trunk Light
12) Under Dash / Courtesy Lights (driver / passenger side)
13) Glovebox Light
14) Dash plaque (usually on Limited models)
15) Dash Gauges / Side Warning Lights (analog & digital dash)
16) HVAC Light (heater / AC)
17) Console Shifter Indicator Light
18) Ashtray Light on Non-Console Cars
19) radio light bulbs
20) Rear Window Defogger Button Light
21) Rear View Mirror Map Lights (upgraded option, not standard on Regals)
22) Passenger Visor Vanity Mirror Light
23) Dome Light (t-top & hardtop; factory & upgraded hardtop versions)
24) CHMSL (Center High Mounted Stop Light, AKA Third Brake Light)
25) Lower Door Panel Courtesy Lights (Limited models)
26) Aftermarket Dash / Other Extra Add-on Gauge Lights (a-pillar, console under radio, etc)
27) Opera / Coach Lights (Limited models)

You can click any link above and be taken to the light of your choice.

.

Related posts


Hey, Turbo Buick Fan!

Was this post beneficial?
More Cool Info is Added Daily!
DON'T Miss Out!
Sign up to our FREE subscription service
and receive an email whenever we post new articles.

Just enter your email address below and click the Subscribe button.
(NO spam sent - only new post alerts)

Join 1,026 other subscribers