banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header
banner ads for header

Changing Rear Tail Park Running Light Bulbs (Center & Side)

The tail lights have the main running lights; park, stop & turn signals.

The rear tail light section contains a total of 4 lights within the red portion (on each side).
There’s 2 small bulbs, and 2 big bulbs.

THIS post is all about the small bulbs.
These are the center running lights & side corner marker running lights.
(post #7 showed you the big lights)

The small bulbs, on the very outside and the center, stay constantly lit when the regular lights are on.

The factory light was a white bulb, behind the red lens.

.

rear park running lights wiring diagram

.

SPECS:

OEM BULB NUMBER: 194

SOCKET COLOR: off-white

NUMBER OF WIRES ATTACHED: 2

WIRE COLOR & PURPOSE:

LH (driver side) rear side marker light:
CONNECTOR 1: brown wire, power in from junction (from light switch)
CONNECTOR 2: black out to ground.

RH (driver side) rear side marker light:
CONNECTOR 1: brown wire, power in from junction (from light switch)
CONNECTOR 2: black out to ground.

LH (driver side) rear center tail light:
CONNECTOR 1: brown wire, power in from junction (from light switch)
CONNECTOR 2: black out to ground.

RH (driver side) rear center tail light:
CONNECTOR 1: brown wire, power in from junction (from light switch)
CONNECTOR 2: black out to ground.

.

.

HOW TO CHANGE BULB:

.

Remove the 4 thumbscrew nuts (per side) to remove the taillight housings.
An 11 mm socket will take off these nuts if you don’t want to use your hands.
Pull the housing away from the vehicle body.
To remove the small bulbs, twist the plug out, pull the bulb out.
Replace bulb.

Reinstall reversing the order.

.

BEFORE WORK STARTS:

.

.

REMOVING THE HOUSINGS:

.

.

REMOVE THE SOCKETS:

.

REAR SIDE MARKER LIGHT:

.

.

CENTER LIGHT:

.

.

rear side marker light ON

.

This is part of an ongoing series about the details & specifics on Changing Light Bulbs in your Buick Turbo Regal:

1) Overview
2) Head Lights
3) Bumper Lights (running lights, turn signals)
4) Front Corner Side Marker Lights
5) Front Lower Cornering Lamps (Limited models)
6) Under Hood Light
7) Brake & Turn Tail Lights
8) Backup Lights (reverse light)
9) Rear Running Tail Lights (center & side corner marker lights) – (THIS page)
10) License Plate Light
11) Trunk Light
12) Under Dash / Courtesy Lights (driver / passenger side)
13) Glovebox Light
14) Dash plaque (usually on Limited models)
15) Dash Gauges / Side Warning Lights (analog & digital dash)
16) HVAC Light (heater / AC)
17) Console Shifter Indicator Light
18) Ashtray Light on Non-Console Cars
19) radio light bulbs
20) Rear Window Defogger Button Light
21) Rear View Mirror Map Lights (upgraded option, not standard on Regals)
22) Passenger Visor Vanity Mirror Light
23) Dome Light (t-top & hardtop; factory & upgraded hardtop versions)
24) CHMSL (Center High Mounted Stop Light, AKA Third Brake Light)
25) Lower Door Panel Courtesy Lights (Limited models)
26) Aftermarket Dash / Other Extra Add-on Gauge Lights (a-pillar, console under radio, etc)
27) Opera / Coach Lights (Limited models)

You can click any link above and be taken to the light of your choice.

.

Related posts


Hey, Turbo Buick Fan!

Was this post beneficial?
More Cool Info is Added Daily!
DON'T Miss Out!
Sign up to our FREE subscription service
and receive an email whenever we post new articles.

Just enter your email address below and click the Subscribe button.
(NO spam sent - only new post alerts)

Join 1,027 other subscribers